[Tugas sekolah] Perintah Internal dan Eksternal DOS

C:\>cmd/?
Starts a new instance of the Windows 2000 command interpreter

CMD [/A | /U] [/Q] [/D] [/E:ON | /E:OFF] [/F:ON | /F:OFF] [/V:ON | /V:OFF]
    [[/S] [/C | /K] string]

/C      Carries out the command specified by string and then terminates
/K      Carries out the command specified by string but remains
/S      Modifies the treatment of string after /C or /K (see below)
/Q      Turns echo off
/D      Disable execution of AutoRun commands from registry (see below)
/A      Causes the output of internal commands to a pipe or file to be ANSI
/U      Causes the output of internal commands to a pipe or file to be
        Unicode
/T:fg   Sets the foreground/background colors (see COLOR /? for more info)
/E:ON   Enable command extensions (see below)
/E:OFF  Disable command extensions (see below)
/F:ON   Enable file and directory name completion characters (see below)
/F:OFF  Disable file and directory name completion characters (see below)
/V:ON   Enable delayed environment variable expansion using c as the
        delimiter. For example, /V:ON would allow !var! to expand the
        variable var at execution time.  The var syntax expands variables
        at input time, which is quite a different thing when inside of a FOR
        loop.
/V:OFF  Disable delayed environment expansion.

Note that multiple commands separated by the command separator '&&'
are accepted for string if surrounded by quotes.  Also, for compatibility
reasons, /X is the same as /E:ON, /Y is the same as /E:OFF and /R is the
same as /C.  Any other switches are ignored.

If /C or /K is specified, then the remainder of the command line after
the switch is processed as a command line, where the following logic is
used to process quote (") characters:

    1.  If all of the following conditions are met, then quote characters
        on the command line are preserved:

        - no /S switch
        - exactly two quote characters
        - no special characters between the two quote characters,
          where special is one of: &<>()@^|
        - there are one or more whitespace characters between the
          the two quote characters
        - the string between the two quote characters is the name
          of an executable file.

    2.  Otherwise, old behavior is to see if the first character is
        a quote character and if so, strip the leading character and
        remove the last quote character on the command line, preserving
        any text after the last quote character.

If /D was NOT specified on the command line, then when CMD.EXE starts, it
looks for the following REG_SZ/REG_EXPAND_SZ registry variables, and if
either or both are present, they are executed first.

    HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\AutoRun

        and/or
Press any key to continue . . .

a. Perintah internal

1. C:\>dir/?
Displays a list of files and subdirectories in a directory.

DIR [drive:][path][filename] [/A[[:]attributes]] [/B] [/C] [/D] [/L] [/N]
  [/O[[:]sortorder]] [/P] [/Q] [/S] [/T[[:]timefield]] [/W] [/X] [/4]

  [drive:][path][filename]
              Specifies drive, directory, and/or files to list.

  /A          Displays files with specified attributes.
  attributes   D  Directories                R  Read-only files
               H  Hidden files               A  Files ready for archiving
               S  System files               -  Prefix meaning not
  /B          Uses bare format (no heading information or summary).
  /C          Display the thousand separator in file sizes.  This is the
              default.  Use /-C to disable display of separator.
  /D          Same as wide but files are list sorted by column.
  /L          Uses lowercase.
  /N          New long list format where filenames are on the far right.
  /O          List by files in sorted order.
  sortorder    N  By name (alphabetic)       S  By size (smallest first)
               E  By extension (alphabetic)  D  By date/time (oldest first)
               G  Group directories first    -  Prefix to reverse order
  /P          Pauses after each screenful of information.
  /Q          Display the owner of the file.
  /S          Displays files in specified directory and all subdirectories.
  /T          Controls which time field displayed or used for sorting
  timefield   C  Creation
              A  Last Access
              W  Last Written
  /W          Uses wide list format.
  /X          This displays the short names generated for non-8dot3 file
              names.  The format is that of /N with the short name inserted
              before the long name. If no short name is present, blanks are
              displayed in its place.
  /4          Displays four-digit years

Switches may be preset in the DIRCMD environment variable.  Override
preset switches by prefixing any switch with - (hyphen)--for example, /-W.

2. C:\>MD/?
Creates a directory.

MKDIR [drive:]path
MD [drive:]path

If Command Extensions are enabled MKDIR changes as follows:

MKDIR creates any intermediate directories in the path, if needed.
For example, assume \a does not exist then:

    mkdir \a\b\c\d

is the same as:

    mkdir \a
    chdir \a
    mkdir b
    chdir b
    mkdir c
    chdir c
    mkdir d

which is what you would have to type if extensions were disabled.

3. C:\>cd/?
Displays the name of or changes the current directory.

CHDIR [/D] [drive:][path]
CHDIR [..]
CD [/D] [drive:][path]
CD [..]

  ..   Specifies that you want to change to the parent directory.

Type CD drive: to display the current directory in the specified drive.
Type CD without parameters to display the current drive and directory.

Use the /D switch to change current drive in addition to changing current
directory for a drive.

If Command Extensions are enabled CHDIR changes as follows:

The current directory string is converted to use the same case as
the on disk names.  So CD C:\TEMP would actually set the current
directory to C:\Temp if that is the case on disk.

CHDIR command does not treat spaces as delimiters, so it is possible to
CD into a subdirectory name that contains a space without surrounding
the name with quotes.  For example:

    cd \winnt\profiles\username\programs\start menu

is the same as:

    cd "\winnt\profiles\username\programs\start menu"

which is what you would have to type if extensions were disabled.

4. C:\>RD/?
Removes (deletes) a directory.

RMDIR [/S] [/Q] [drive:]path
RD [/S] [/Q] [drive:]path

    /S      Removes all directories and files in the specified directory
            in addition to the directory itself.  Used to remove a directory
            tree.

    /Q      Quiet mode, do not ask if ok to remove a directory tree with /S

5. C:\>DATE/?
Displays or sets the date.

DATE [/T | date]

Type DATE without parameters to display the current date setting and
a prompt for a new one.  Press ENTER to keep the same date.

If Command Extensions are enabled the DATE command supports
the /T switch which tells the command to just output the
current date, without prompting for a new date.

6. C:\>TIME/?
Displays or sets the system time.

TIME [/T | time]

Type TIME with no parameters to display the current time setting and a prompt
for a new one.  Press ENTER to keep the same time.

If Command Extensions are enabled the TIME command supports
the /T switch which tells the command to just output the
current time, without prompting for a new time.

7. C:\>REN/?
Renames a file or files.

RENAME [drive:][path]filename1 filename2.
REN [drive:][path]filename1 filename2.

Note that you cannot specify a new drive or path for your destination file.

8. C:\>DEL/?
Deletes one or more files.

DEL [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names
ERASE [/P] [/F] [/S] [/Q] [/A[[:]attributes]] names

  names         Specifies a list of one or more files or directories.
                Wildcards may be used to delete multiple files. If a
                directory is specified, all files within the directory
                will be deleted.

  /P            Prompts for confirmation before deleting each file.
  /F            Force deleting of read-only files.
  /S            Delete specified files from all subdirectories.
  /Q            Quiet mode, do not ask if ok to delete on global wildcard
  /A            Selects files to delete based on attributes
  attributes    R  Read-only files            S  System files
                H  Hidden files               A  Files ready for archiving
                -  Prefix meaning not

If Command Extensions are enabled DEL and ERASE change as follows:

The display semantics of the /S switch are reversed in that it shows
you only the files that are deleted, not the ones it could not find.


b. perintah eksternal

1. C:\>FORMAT/?
Formats a disk for use with Windows 2000.

FORMAT volume [/FS:file-system] [/V:label] [/Q] [/A:size] [/C] [/X]
FORMAT volume [/V:label] [/Q] [/F:size]
FORMAT volume [/V:label] [/Q] [/T:tracks /N:sectors]
FORMAT volume [/V:label] [/Q] [/1] [/4]
FORMAT volume [/Q] [/1] [/4] [/8]

  volume          Specifies the drive letter (followed by a colon),
                  mount point, or volume name.
  /FS:filesystem  Specifies the type of the file system (FAT, FAT32, or NTFS).
  /V:label        Specifies the volume label.
  /Q              Performs a quick format.
  /C              Files created on the new volume will be compressed by
                  default.
  /X              Forces the volume to dismount first if necessary.  All opened
                  handles to the volume would no longer be valid.
  /A:size         Overrides the default allocation unit size. Default settings
                  are strongly recommended for general use.
                  NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K.
                  FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,
                  (128K, 256K for sector size > 512 bytes).
                  FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K,
                  (128K, 256K for sector size > 512 bytes).

                      Note that the FAT and FAT32 files systems impose the
                  following restrictions on the number of clusters on a volume:

                  FAT: Number of clusters <= 65526
                  FAT32: 65526 < Number of clusters < 268435446

                  Format will immediately stop processing if it decides that
                  the above requirements cannot be met using the specified
                  cluster size.

                  NTFS compression is not supported for allocation unit sizes
                  above 4096.
  /F:size         Specifies the size of the floppy disk to format (160,
                  180, 320, 360, 640, 720, 1.2, 1.23, 1.44, 2.88, or 20.8).
  /T:tracks       Specifies the number of tracks per disk side.
  /N:sectors      Specifies the number of sectors per track.
  /1              Formats a single side of a floppy disk.
  /4              Formats a 5.25-inch 360K floppy disk in a
                  high-density drive.
  /8              Formats eight sectors per track.

2. C:\>DISKCOMP/?
Compares the contents of two floppy disks.

DISKCOMP [drive1: [drive2:]]

3. C:\>UNDELETE
'UNDELETE' is not recognized as an internal or external command,
operable program or batch file.

4. C:\>DISKCOPY/?
Copies the contents of one floppy disk to another.

DISKCOPY [drive1: [drive2:]] [/V]

  /V   Verifies that the information is copied correctly.

The two floppy disks must be the same type.
You may specify the same drive for drive1 and drive2.